Metal Wall Trim


Clear selection
SKU: N/A. Category: .

Metal Wall Trim 

Length:            3.0
Width:             25mm / 40mm
Height:            90mm
Material:         Plastisol Coated Steel
Colour:            Black
Qty in Pack:   1
Included:        35mm Self Sealing Hex Fasteners

Used for:

An economic but high quality finish to the roof perimeter, metal wall trims create a finishing edge to the flat roof. Used in conjunction with Lap Sealant to create a waterproof junction on up-stands or wall junctions.

Installation Notes:

Can also be used as Gutter Drip Trim when installing Metal Edge Trims (Can be top or side fixed with screws included).

When using as a wall up-stand trim the membrane is dressed into the wall or up-stand using the Wall Trim.

Requires use of Angle Grinder to create channel in brickwork or render

Don’t forget to order Mastic. The sealant is inserted along the top of the Wall Trim into the pre-ground slot in the wall or up-stand.

If you don’t have an angle grinder use our 3 metre termination bars instead of the wall trim to create a watertight seal on all up-stands